Your First Motorbunny Machine Ride: Setup, Safety, and Positions (With Pics)

Hey friend—welcome to your very first Motorbunny ride! 🎉This guide walks you step-by-step from unboxing to aftercare, so your first, and all future sessions on your Motorbunny vibrator machine feelsafe, comfy, and fun.

You’ll get:

• A quick unbox & setup for Motorbunny Original Starter Kit
• A no-stress safety check and lube basics
  
• Body alignment tricks that make riding easier
  
• Beginner riding positions with photos
  
• Aftercare, cleaning, and storage made simple
  
• Handy charts, bonus tips, and checklists you can screenshot
  
  

Sex Machine 101: What’s in the Motorbunny Starter Kit

Your Motorbunny machine arrives with the essentials to hop on right away:

• The Motorbunny base (your ride on vibrator “saddle”)
  
• Fluffer-ready controller (for easy speed control now, and app control later)
  
• Power supply and cable
  
• Starter attachments and topper
  
• Two Attachment Risers (to boost contact where you want it)
  
• Instructions and safety notes
  
  

If you like extra comfort or play longer, consider these add-ons:

• Premium Knee Pads (save those knees on floors and carpets)
  
• Right-Angle Wedge (stabilizes your vibrator machine for lying-down or doggy setups)
  
• Wedge or pillows for hip and back support
  
• Freedom Rider Sling or a sturdy surface for your hands to hold

Bonus Tip: Keep the box! It’s perfect for discreet storage and protects your gear. If you want something a bit more chic, check out the Motorbunny Travel Cruiser and Backpack. 

See it in motion: Quick start and comparison videos live on the Motorbunny Videos page.

Written quick start (support): A simple help article is here if you like step-by-step notes.

Ride on Vibrator Setup: Unbox → Assemble → Test

1. Pick your spot.
   A firm, stable surface is best (floor, rug, or a solid bed center). If you’re on the floor, grab a blanket and Premium Knee Pads so you stay comfy during a longer session.
   
2. Place the base.
   Put the Motorbunny machine down so the power cable won’t pull or kink. If you’re using a Right-Angle Wedge, prop the unit as shown in the Position Guide.
   
3. Attach the topper/attachment.
   Start with a flat/grind topper or a slimmer insertable so your first ride is gentle. Seat it firmly.
   
4. Add an Attachment Riser (optional).
   If your clitoris (or preferred contact area) sits higher, snap on a riser under the attachment for better reach.
   
5. Plug in and set dials to zero.
   Before hopping on, make sure Buzz/Twirl (Original) or Buzz/Thrust (BUCK) are at 0. Then power on.
   
6. Do a sound check.
   Nudge Buzz to 10–15%. Listen. Everything steady? Great—set back to 0.

Bonus Tip: Place the controller where your hand naturally rests, or hand it to a partner. You should never have to twist to grab it.

Riding a vibrator safely: Lube, materials, and a quick comfort check

Lube basics for success

• Use water-based lube with silicone attachments. It spreads easily and cleans up fast.
  
• Add a little to you and the attachment. Re-apply when you increase speed.
  
• For textured toppers, use a thicker water-based gel so it stays put in grooves.
  
  

Material & cleaning basics

• Most Motorbunny premium attachments are silicone (non-porous). Clean with warm water + gentle toy cleaner before and after use; air dry.
  
• Do not submerge the Motorbunny base in water. Wipe the saddle with a damp cloth and dry.
  
  
  
  

Comfort check before you ride:

• Knees padded?
  
• Hips supported by a pillow or wedge if needed?
  
• Controller in reach?
  
• Hair/clothing out of the way of moving parts?

Turn the room lights low and start music. The Motorbunny Fluffer app can sync patterns to music later if you want app control.

Motorbunny Machine Body Alignment: Find your best angle in 90 seconds

Your body is unique. Tiny angle changes make big differences—especially for clitoral, G-spot, and P-spot contact.

• Forward lean (hands on a support): more clitoral pressure.
  
• Neutral torso (upright): balanced external/internal feel.
  
• Leaning back (hands behind you or on a rest): more internal pressure.
  
  

90-second drill

1. Sit on the saddle with Buzz at 10–20%.
   
2. Lean forward 2 inches → breathe → notice.
   
3. Sit up neutral → breathe → notice.
   
4. Lean back 2 inches → breathe → notice.
   
5. Pick your favorite and add 5–10% buzz.
   

Bonus Tip: If you feel “almost there,” try adding one Attachment Riser or slide a folded washcloth under your pubic bone to lift your target area by ~1 cm.

Motorbunny Vibrator Machine Positions (with pics)

All of the positions below are pictured in the official Position Guide—great for bookmarking and visual reference. (Look for “Cowgirl,” “Lying Down,” “Doggy,” and more.)

Easy Cowgirl 

• How: Swing a leg over, knees on pads or a folded blanket. Sit tall or lean slightly forward.
  
• Why it’s great: Easiest control. Perfect for first rides, grinding, and smaller movements.
  
• Starter settings: Buzz 15–30%, Twirl/Thrust off. Add motion later.
  
• Accessories: Premium Knee Pads, Attachment Risers for clitoral reach.
  

Pro move: Try “Lady Godiva”—raise your Motorbunny machine safely on a wide, sturdy surface so your feet plant flat and your legs can squat (never use wobbly or narrow furniture). 

Reverse Cowgirl 

• How: Same as above, but face the controller.
  
• Why it’s great: Changes the angle for internal spots; sometimes more A-spot/G-spot pressure.
  
• Starter settings: Buzz 20–35%. Add short Twirl pulses (Original) or shallow Thrust (BUCK).
  

Lying-Down Missionary 

• How: Prop the vibrator machine on the Right-Angle Wedge against a wall/headboard, or stabilize at bed center. Lie on your back, scoot to meet the attachment.
  
• Why it’s great: Low effort, very comfortable, perfect if knees get tired.
  
• Starter settings: Buzz 10–25% steady.
  
• Accessories: Right-Angle Wedge, small pillow under hips for angle.
  
  

Doggy-Style Kneel 

• How: On all fours, scoot back to the attachment. Knees wide = lower hips; knees narrow = higher hips.
  
• Why it’s great: Deep internal angles with steady thrust (BUCK) or textured toppers (Original).
  
• Starter settings: Buzz 15–30%. For BUCK, start shallow thrust and increase slowly.
  
• Accessories: Premium Knee Pads, Wedge for machine stability.
  

The Squat

• How: From Cowgirl, bring feet under you to a squat. Lightly hold the front of the Motorbunny machine for balance.
  
• Why it’s great: You control depth with your legs; great for “in-out” pressure.
  
• Starter settings: Buzz 20–35%, short Twirl/Thrust bursts.
  
• Accessories: Bunny Rest or bed edge for hand support; Knee Pads if you reset to kneel.
  

Bonus Tip: See the full Position Guide for photos and extra tips. It also shows variations for Motorbunny Original vs. BUCK so you can match motions to positions.

Motorbunny starter kit comfort chart

Using sex machine with Fluffer: When you’re ready for app control (optional)

You can start simple with the manual controller. When you’re ready, the Motorbunny Fluffer app lets you:

• Draw your own Buzz/Twirl patterns
  
• Save routines you love
  
• Hand control to a partner
  
• Try music-sync fun

Bonus Tip: For your very first ride, skip the app and stay manual. Add Fluffer on ride #2 or #3—when you already know what you like.

Riding a Vibrator Safety Checklist (2 minutes)

Before you hop on

✔ Machine on stable, wide surface (no narrow stools, no wobbly tables)

✔ Cable path clear, controller in reach

✔ Attachment seated fully; riser snapped in place

✔ Water-based lube ready (pump within reach)

✔ Knees padded / hips supported

During your ride

✔ Start Buzz at 10–20% for 30–60 seconds

✔ Add either Twirl/Thrust or more Buzz (not both at once for your first minute)

✔ Breathe, shift your angle 1–2 inches to find your sweet spot

✔ Re-lube when you increase speed

If anything feels off

✔ Turn dials to zero

✔ Adjust angle, padding, or lube

✔ Try again at a lower level

Your First Vibrator Machine Ride

Cowgirl (knees on pads).

• Buzz 15% for 60 seconds (just breathe and feel).
  
• Buzz 25% for 45 seconds (small hip rocks).
  
• Add Twirl/Thrust 10% for 15 seconds, then off. Repeat 3 times.
  
  

Lying down (hip pillow).

• Buzz 20% for 60 seconds (stillness).
  
• Buzz 30% for 45 seconds (slow breaths).
  
• Optional: short 10% Twirl/Thrust pulses (5 seconds on, 10 off).
  
  

Your choice of the two positions—pick the one that felt best.

• Stay there and build up gently.
  
• Re-lube, sip water, relax your jaw and shoulders.

Bonus Tip: Want visual help? Watch the quick start and compare videos on the Motorbunny Videos page.

Motorbunny Machine Aftercare: Cleaning, Drying, and Storage

Attachments (silicone):

• Wash with warm water + gentle, fragrance-free toy cleaner right after use.
  
• Rinse well; air-dry fully.
  
• Store dry, away from other toys.
  
  

Base (saddle):

• Unplug. Wipe with a damp, cloth or toy cleaner. Wipe dry.
  
• Do not submerge the unit.
  
• Coil the power cable loosely; keep sharp bends away from plugs.
  

Dials decoded: Using sex machine controls

• Buzz = vibration intensity. Start low (10–20%).
  
• Twirl (Original) or Thrust (BUCK) = motion. Add short, low pulses once you’re comfy.
  
• Increase one control at a time so your body can adjust.

Bonus Tip: If loudness worries you, put a folded blanket under the Motorbunny machine or place it on the bed to dampen sound.

Ride-On Vibrator FAQs 

Q: Which attachment should I start with?
A: Use a flat/grind topper or a slimmer insertable. You’ll learn your best angle without being overwhelmed.

Q: Is the Right-Angle Wedge only for one position?A: No. It stabilizes the Motorbunny machine for lying-down, doggy, and angled setups.

Q: Can I start with the Fluffer app?
A: You can, but many beginners do ride #1 with the manual controller, then try Fluffer on ride #2 or #3. App setup and features are here. 

Q: What kind of lube should I get?
A: Get a water-based lube for silicone attachments.

Motorbunny Starter Kit Summary 

• Unbox, place on a stable surface, set dials to zero, lube ready
  
• Start with Cowgirl or Lying Down
  
• Use water-based lube, re-apply as you increase speed (external lube guidance below)
  
• Add Attachment Risers if you want more clitoral contact or for anal penetration.
  
• Protect joints with Premium Knee Pads; stabilize with a Right-Angle Wedge
• Clean attachments with warm water + gentle toy cleaner and air-dry
  
• Try the Fluffer app when you’re ready for patterns and partner control

Riding a vibrator quick-pick chart

Long-Distance Sex Machine Control Tips

• Pair the LINK controller to your phone (follow the FAQ).
  
• Draw a gentle “stairs” routine (up 5%, hold, up 5%, hold).
• Share control with your partner for 5-minute “turns.”
  

Bonus Tip: Always have a “safe signal” word or hand tap for “pause now.” You’re in charge of your ride.

Aftercare checklist (you did great!)

✔ Drink some water.

✔ Stretch your hips and low back (child’s pose or knees-to-chest).

✔ Wash attachments with warm water + gentle toy cleaner; air-dry.

✔ Wipe the saddle with a damp cloth; dry.

✔ Store attachments separately and dry (helps keep materials happy).

External credible sources (lube & cleaning)

• Planned Parenthood — Lube Basics: clear, friendly overview to choose water-based for silicone toys and how to think about lube types. Planned Parenthood
• Healthline — Cleaning Sex Toys: simple, expert-reviewed guide for cleaning, drying, and storage by material. Healthline